1. Power On/Off:

   - Press the Power button at the top to turn the TV on or off.

​

2. Volume Control:

   - Press Volume Up (+) to increase volume.

   - Press Volume Down (-) to decrease volume.

   - Press Mute to silence or unmute.

​

3. Channel Control:

   - Use Channel Up (▲) and Channel Down (▼) to navigate channels.

​

4. Smart Hub Navigation:

   - Press the Home button (house icon) to access the Smart Hub.

   - Use directional buttons (▲▼◄►) to navigate.

   - Press Select (center of directional pad) to choose options.

​

5. Art Mode:

   - Press the Art button to enter Art Mode.

   - Use directional buttons to browse artworks.

   - Press Select to display artwork.

   - Exit Art Mode by pressing the Home or Power button.

​

6. Input Selection:

   - Press the Source button to switch inputs.

   - Highlight and select the desired input using directional buttons and select.

​

For any issues or further assistance, please contact our team.

Ensure the area around the fireplace is clear of flammable objects.

 

1. Turning On the Fireplace: Locate the fireplace remote control.

​

2. Activate the fireplace by pressing the Power button on the remote.

​

3. Adjusting Flame Height:

Use the Flame Up (▲) and Flame Down (▼) buttons on the remote to adjust the flame height to your preference.

​

4. Setting the Temperature:

Press the Thermostat button on the remote.

Adjust the room temperature using the Up (▲) and Down (▼) buttons.

​

5. Turning Off the Fireplace:

To turn off the fireplace, press the Power button on the remote or switch the wall switch to the "Off" position.

 

6. Using the Timer (if available):

If your fireplace has a timer function, press the Timer button on the remote.

Set the desired operation time using the Up (▲) and Down (▼) buttons.

 

7. Safety Tips:

Never leave the fireplace unattended while it is in operation.

Keep children away from the fireplace when it is on.

Avoid touching the glass front when the fireplace is hot or shortly after it has been turned off.

 

Enjoy the warmth and ambiance of your gas fireplace!

1. Turning On the Steam Generator:

Locate the control panel inside shower.

Turn on the steam generator by pressing the power button.

​

2. Setting the Temperature:

Use the temperature control panel to set your desired steam temperature. Typical steam temperatures range between 100°F to 120°F (38°C to 49°C).

​

3. Adjusting Steam Duration:

Set the duration for how long you want the steam to operate. This can usually be adjusted using a timer function or duration settings on the control panel.

​

4. Waiting for Steam Generation:

Allow a few minutes for the steam generator to heat up and produce steam. The control panel may indicate when steam is ready.

​

5. Entering the Steam Shower:

Once steam is generated, enter the shower and close the door tightly to maintain steam inside.

​

6. Enjoying the Steam:

Relax and enjoy the soothing steam for up to 20-30 minutes or as desired. Sit or recline comfortably to maximize relaxation.

​

7. Exiting the Steam Shower:

After use, turn off the steam generator using the control panel.

Open the steam shower door cautiously to avoid exposure to hot steam.

 

8. Safety Tips:

Always ensure the steam shower area is well-ventilated after use to prevent moisture buildup.

Drink water before and after using the steam shower to stay hydrated.

Avoid using the steam shower if you have health conditions that may be aggravated by high humidity or heat.